Pipe and metal calculator 30.0

The metal calculator presented here offers a practical solution for calculating the weight of metal based on its length, and vice versa. The application organizes various types of metal rolls according to their standards (GOST), allowing for a straightforward selection process.

Calculation Method:

1. Calculate the mass of metal from a specified length.
2. Determine the length of a pipe for a specified mass.
3. Select the relevant GOST standard for your chosen metal.

Within this calculator, users will find a comprehensive guide to all steel pipe diameters, each conveniently categorized by GOST standards. Notably, the profile pipes include:

• Rectangular profile pipes: GOST 8645-68 and GOST 30245-2013
• Rectangular pipes for construction: GOST 32931-2015
• Electric-welded pipes: TU 14-105-737-2004 and TU 14-105-566-93

The square pipes listed are:

• Square steel pipes: GOST 8639-82
• Square pipes for metalwork: GOST 32931-2015
• Electric-welded square pipes: TU 14-105-566-93

For electric-welded pipes, the following standards apply:

• Welded water and gas pipeline pipes: GOST 3262-75
• Electric-welded steel pipes: GOST 10705-80
• Cold-deformed electric-welded pipes: GOST 10707-80
• Welded pipes for gas and oil pipelines: GOST 20295-85

The seamless steel pipe options include:

• Hot-deformed steel pipes: GOST 8731-74 and GOST 8732-78
• Hot-deformed seamless steel pipes: GOST 32528-2013
• Precision steel pipes: GOST 9567 -81

The calculator encompasses various forms of metal rolling, including:

• Fittings: Hot-rolled reinforcing steel: GOST 5781 -82; Reinforcing welded bars A500C and B500C: GOST R 52544-2006; Periodic profile from reinforcing steel: STO ASChM 7-93.
• I-beams: Hot-rolled beams: GOST 8239-89; Special steel beams: GOST 19425-74.
• Sheets: Hot-rolled sheets: GOST 19903-2015; Cold-rolled sheets: GOST 19904-90.
• Corners: Equal-shelf corners: GOST 8509-93; Unequal corners: GOST 8510-86.
• Channels: Hot-rolled channels: GOST 8240-97; Equal-shelf bent channels: GOST 8278-83; Non-equal-shelf bent channels: GOST 8281-80.
• Squares: Hot-rolled squares: GOST 2591-2006; Calibrated squares: GOST 8559 -75.
• Circles: Hot-rolled rounds: GOST 2590-2006; Tool steel circles: GOST 1435-99; Calibrated circles: GOST 7417-75.
• Tapes: Packaging steel tapes: GOST 3560-73; Hot-rolled tapes: GOST 6009-74.
• Strips: Hot-rolled strips: GOST 103-2006; Tool unalloyed steel strips: GOST 1435-99.
• Mesh: Metal wire mesh: GOST 2715-75.
• Dowel Larsen.
• Hexagons: Hot rolled hexagons: GOST 2879-2006.
• Railway rails: GOST R 51685-2013.